EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is a very successful photo voltaic controller designed for off-grid solar methods. Based upon multiphase synchronous rectification technology, it guarantees optimized Vitality conversion and program security for a wide array of photovoltaic (PV) apps.

Critical Options of the EPEVER Tracer AN Series Controller
The Tracer AN collection makes use of EPEVER Solar Demand Controller technology for exceptional solar Power harvesting. Important functions contain:

Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with serious-time details checking.
Many Load Management Modes like guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the product amount and voltage rankings match your solar panel and battery specifications.
2. Mounting the Charge Controller
Find a very well-ventilated, dry spot near to the battery bank.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Solar Cost Controller
Caution: Normally observe suitable security protocols and ensure the procedure is driven off just before connecting components.

Move one: Link the battery terminals towards the demand controller (beneficial to constructive, unfavorable to negative).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Move 3: Connect the load terminals if employing a direct load connection.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller Click Here by connecting the battery to start with.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, light-weight Management.
5. Checking and Knowledge Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port using program including Photo voltaic Station Computer system.
Distant monitoring is achievable Together with the EPEVER WiFi module.
six. Troubleshooting Widespread Issues
Difficulty one: No Power Output

Check out battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Protection

Verify the photo voltaic array’s voltage rating.
Change program parameters if vital.
Situation three: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations while in the menu.
Benefits of the Tracer AN Series with MSR Technologies
The multiphase synchronous rectification technological know-how makes certain:

Larger Performance: Lowered Electrical power losses through conversion.
Enhanced Reliability: Stable functionality underneath variable masses.
For a longer period Battery Daily life: Consistent and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an exceptional choice for optimizing solar energy technology and extending battery lifetime. By following the above set up guide, consumers can assure maximum effectiveness and procedure longevity.