EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a remarkably efficient solar controller made for off-grid solar techniques. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) applications.
Important Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for outstanding solar Strength harvesting. Essential characteristics include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time knowledge checking.
A number of Load Regulate Modes including handbook and timer.
In depth Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and person guide.
Verify the model amount and voltage rankings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Pick a effectively-ventilated, dry location near the battery lender.
Safe the Tracer AN controller utilizing the furnished mounting brackets.
Manage proper clearance for warmth dissipation.
three. Wiring the Photo voltaic Demand Controller
Warning: Constantly stick to correct protection protocols and make sure the technique is powered off before connecting factors.
Phase 1: Connect the battery terminals to your cost controller (constructive to constructive, unfavorable to negative).
Action two: Link the photo voltaic panel array to your PV enter terminals.
Step 3: Link the load terminals if using a immediate load link.
Step four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Electric power about the controller by connecting the battery initial.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Handle.
five. Monitoring and Data Logging
The Tracer AN Collection supports actual-time checking utilizing the MT50 remote meter.
Facts might be logged through the RS485 communication port working with application such as Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Widespread Issues
Difficulty 1: No Power Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection
Validate the solar array’s voltage score.
Adjust technique parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options inside the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how guarantees:
Bigger Efficiency: Lessened Vitality losses during conversion.
Improved Trustworthiness: Stable effectiveness under variable masses.
Longer Battery Existence: Dependable and correct charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how visit here is surely an Remarkable choice for optimizing solar energy technology and extending battery daily life. By next the above set up guideline, customers can guarantee maximum efficiency and program longevity.